Recommended minimum space above
the propulsor is abt. 300 mm |
Propulsor
Room Space
There should be enough internal height in the
propulsor room to allow for installation as well as
maintenance of the units. Recommended is a height
of 200 …300 mm above the units. A separate bolted-on
maintenance hatch can be installed above the unit
if enough height is otherwise not available. The Steerprop
Azimuth Propulsors are designed to be as short as
possible, i.e. the internal height requirement is
minimised and thus the units are suitable also for
low deck heights.
|
