|
|
|
Steerprop Propulsor Data
- Basic Information
DIMENSIONAL
DRAWINGS
The
dimensional drawings in the downloadable files below
are given for information only. The AutoCAD drawings
are provided to assist naval architects, designers
and shipyards in
the preliminary stages of a project. The data and
values shown may be changed at any time without
prior notice. To confirm specific data or the validity
of the drawings, please contact either Steerprop
or your local representative.
|
PDF
Drawings
The
drawings below are in Adobe *.pdf format and the
link will open the drawing. If you would like to
download a drawing to your hard disk, please right
click the link and choose "save target as".
Before starting, please read the note below.
|
| |
|
(48 kB) |
| |
|
weld-in (48 kB) |
| |
Steerprop
SP 10 D |
large
mounting adapter (48 kB) |
| |
|
weld-in
(45 kB) |
| |
|
large
mounting adapter (53 kB) |
| |
Steerprop
SP 20 D |
Large
mounting adapter (48 kB) |
| |
|
(49
kB) |
| |
|
large mounting adapter
(51 kB) |
| |
|
(51
kB) |
| |
Steerprop
SP 35 D |
large
mounting adapter (55 kB) |
| |
|
(47
kB) |
| |
|
|
|
NOTE:
The above drawings are stored as Acrobat Portable
Document Format (*.pdf) files. To be able to read
the files you need to have Acrobat Reader - which
is a freeware program- installed on your computer.
You may download it from the Adobe website (click
the link/button in the right margin).
|
AutoCAD Drawings
The drawings below have been saved in AutoCAD 2000
*.dwg format. If you require drawings saved to an
earlier AutoCAD release, please contact Steerprop
or your local representative. To save downloading
time the files have been compressed using WinZip.
Using the links below will automatically start to
download the files. Before
starting, please read the note below.
|
| |
|
(156 kB) |
| |
|
weld-in (147 kB) |
| |
|
large
mounting adapter (470 kB) |
| |
|
weld-in
(202 kB) |
| |
Steerprop
SP 14 D |
large
mounting adapter (210 kB) |
| |
Steerprop
SP 20 D |
Large
mounting adapter (149 kB) |
| |
|
(147
kB) |
| |
|
large mounting adapter
(148 kB) |
| |
|
(156
kB) |
| |
Steerprop
SP 35 D |
large
mounting adapter (160 kB) |
| |
|
(136
kB) |
| |
|
|
|
NOTE:
The above drawings have been compressed using
WinZip 8.1 and stored as *.zip files. To be able
to open the files you need to have WinZip, ZipGenius
or some other program able to open *.zip files installed
on your computer. You may download ZipGenius (freeware)
or an evaluation version of WinZip 8.1 by clicking
the link/icon in the right margin.
|
